Study of metal-loaded activated charcoals for the separation and determination of selenium species by energy dispersive X-ray fluorescence analysis

Conversion of adsorption properties of activated charcoal (C^∗) by metal modification towards selenite, selenate and seleno-dl-methionine (Se-Met) was studied. Several metals were included in modification studies and also a procedure was developed for the separation and independent determination of microgram quantities of these selenium species in aqueous solution. Selenium species were collected one by one from the same sample solution onto collector material by adsorbing them directly or after complex formation onto different metal-loaded activated charcoals (MgC^∗ and FeC^∗). The mass of selenium in these collectors was measured directly by energy dispersive X-ray fluorescence spectrometry (EDXRF). Detection limits for all three selenium species were better than 6 μg corresponding to concentration of 60 μg/l with 0.100 l of initial sample volume.     

Thermo-XRD analysis of the adsorption of Congo-red by montmorillonite saturated with different cations

The adsorption of the organic anionic dye Congo red (CR) by montmorillonite saturated with Na⁺, Cs⁺, Mg²⁺, Cu²⁺, Al³⁺ and Fe³⁺ was investigated by XRD of unwashed and washed samples after equilibration at 40% humidity and after heating at 360 and at 420°C. The clay was treated with different amounts of CR, most of which was adsorbed. Clay samples, untreated with CR, after heating showed collapsed interlayer space. Unwashed and washed samples, which contained CR, before heating were characterized by three peaks or shoulders, labeled A (at 0.96-0.99 nm, collapsed interlayers), B (at 1.24-1.36 nm) and C (at 2.10-2.50 nm). Peak B represents adsorbed monolayers of water and dye anions inside the interlayer spaces. Peak C represents interlayer spaces with different orientations of the adsorbed water and organic matter. Diffractograms of samples with small amounts of dye were similar to those without dye showing peak B whereas diffractograms of most samples with high amounts of dye showed an additional peak C. Heated unwashed and washed samples were also characterized by three peaks or shoulders, labeled A' (at 0.96 nm), B' (at 1.10-1.33 nm) and C' (at 1.61-2.10 nm), representing collapsed interlayers, and interlayers with charcoal composed of monolayers or multilayers of carbon. When the samples were heated from 360 to 420°C some of the charcoal monolayers underwent rearrangement to multilayers. In the case of Cu the charcoal decomposed and oxidized. The present results show that most of the adsorbed dye was located inside the interlayer space.This revised version was published online in November 2005 with corrections to the Cover Date.     

Fast-cycle trace analysis of dioxin in flue gas. Monitoring of the incineration of dioxin-containing waste from seveso

The fast trace analysis method used to monitor 2,3,7,8-TCDD in stack gas during the incineration of the waste from Seveso is described. The sampling of volatile organic compounds from flue gases, distributed between all three aggregation states, is based on a micromethod developed for the trace analysis of water using a specially dimensioned adsorptive charcoal filter (1.5 mg charcoal). In conjunction with subsequent GC/MS measurements the rapid “fast cycle trace analysis” ensured specific 2,3,7,8-TCDD detection down to 100 pg per m³ flue gas in cycle times of about 1–2 hours.     

Rapid determination of desorption efficiency, and analysis of solvent mixtures for occupational exposure studies

Summary An analytical procedure has been developed for simultaneous determination of solvent mixture vapors to enable evaluation of occupational exposure. To determine the desorption efficiency the volatile components of the solvent mixtures were generated from a glass tube filled with glass wool. This device is easy to prepare and use. These vapors were then collected in activated charcoal tubes and analyzed by capillary gas chromatography. The method was tested with a mixture of 22 solvents, including aliphatic and aromatic hydrocarbons, alcohols, ethers, esters, and ketones, all at low concentrations. All the components were detected. When a 99∶1 mixture of carbon disulfide-dimethylformamide was used for desorption the efficiency was>75% for most of the solvents.     

基于毛竹叶片理化参数的刚竹毒蛾危害检测研究

虫害检测算法研究是开展虫害快速、准确监测，制定精准森防检疫措施的重要基础。以毛竹叶片为研究尺度，基于刚竹毒蛾危害下的寄主外部形态与内部生理现象总结，选择并实测叶损量LL、相对叶绿素含量RCC、相对含水量RWC、原始光谱的733.66~898.56 nm值(ρ_{733.66~898.56})、一阶微分光谱的562.95~585.25 nm值(ρ′_{562.95~585.25})与706.18~725.41 nm值(ρ′_{706.18~725.41})等理化参数，随机划分实验组(63组)和验证组(37组)并设计5次重复实验；分别运用Fisher判别分析、BP神经网络、随机森林等三种方法建立刚竹毒蛾危害等级的检测模型，从检测精度、Kappa系数及R2等指标对模型的检测效果予以分析和比较。结果显示，Fisher判别分析、BP神经网络、随机森林的检测精度分别为69.19%，65.41%，83.78%，Kappa系数分别为0.576 9，0.532 4和0.778 8，R2分别为0.722 2，0.582 6和0.870 9，总体而言，三种方法均具备刚竹毒蛾危害的检测能力，随机森林的检测效果最优，Fisher判别分析次之，再次为BP神经网络；从分等级来看，随机森林的检测精度亦优于Fisher判别分析与BP神经网络，但3种方法对中度危害等级的检测精度均有所不足。该成果可为刚竹毒蛾危害及其他病虫害检测算法的选择提供参考，并为进一步建立冠层、遥感影像像元等尺度的虫害检测模型奠定基础。     

前缀码与极大前缀码的一种新刻画

在语言图Γ(X*)概念的基础上,用新引入的语言竹竿l(X*)和语言竹竿集L(X*)的概念形象地刻画了前缀码与极大前缀码:A是前缀码l(X*)∈L(X*),S_l_((X*))∩A或为单点集或为Φ;A是极大前缀码l(X*)∈L(X*),i)S_(l(X*))∩A或为单点集或为Φ.ii)S_(l(X*))∩A=Φ■u∈S_(l(X*)),■a∈A,ω∈X~+使a=uw.     

The investigation on the effect of surface radiation oxidation of bamboo fiber‐filled PMMA composite

The aim of this investigation was to study the effect of surface thermal oxidation of bamboo/poly(methyl methacrylate) composite by irradiation. Thermal oxidative effects on the surface energy of bamboo fiber were measured by radiation as a function of exposure time and temperature. Oxidized bamboo/poly(methyl methacrylate), after exposure to air at temperatures of 100°C and 110°C, had a range of maximum surface energies from 38 to 41 mJ/m². Comparisons between Fourier transform infrared carbonyl peak growth and the surface energy showed that both methods detect oxidation, though the increase in surface energy was detected before the carbonyl peak growth was noticeable. The work of adhesion predicted by the surface free energies obtained in this work between a coated calcium carbonate and bamboo fiber changes by 10% due to the oxidation of the polymer at 110°C. The structural results were discussed in the oxidation chemistry of the macromolecule.     

The Efficient Synthesis of 3,4-Dihydropyrimidin-2-(1H)-Ones and Their Sulfur Derivatives with H2SO4 Immobilized on Activated Charcoal

Abstract

Various 3,4-dihydropyrimidin-2-(1H)-ones (DHPMs) and their sulfur derivatives were efficiently synthesized by a one-pot cyclocondensation reaction of aromatic and aliphatic aldehydes, β-dicarbonyl compounds and urea (or thiourea) in the presence of sulfuric acid immobilized on activated charcoal (133% w/w). The reactions were carried out in refluxing n-hexane-acetonitrile (2.5:0.5 mL) within 5–150 min to give 3,4-dihydropyrimidinones (or thiones) in high to excellent yields (81–97%).     

NaBH4/Charcoal: A New Synthetic Method for Mild and Convenient Reduction of Nitroarenes

NaBH₄ in the presence of charcoal (0.4–0.8 g) reduces varieties of nitroarenes to their corresponding amines. Reduction reactions were carried out in a mixture of H₂O‐THF (1:0.5 mL) at 50–60°C with high to excellent yields of products.     

Conversion of biomass residual to acid-modified bio-chars for efficient adsorption of organic pollutants from industrial phosphoric acid: an experimental,kinetic and thermodynamic study

ABSTRACT

This study reports the removal of organic matters from phosphoric acid using waste-produced bio-charcoal structures. Particularly, the freshly made bio-char species via pyrolysis and two sub-driven acids activated charcoals were applied during the removal process. The treated charcoal with hydrochloric and nitric acids had attained a higher adsorption rate for organic matters than that of the non-treated one. Removal percentages of 70% and 60% were, respectively, attained by acid-modified chars. The kinetics of the adsorption process was fitted via pseudo-first/second-order and Morris–Weber models. The thermodynamic parameters of the presented sorption process indicate that organic matter removal has been endothermic, physical and spontaneous.